display v2: Refactor everything

This commit is contained in:
CTCaer 2020-04-30 13:45:28 +03:00
parent 1483a61f11
commit 3db55df0a6
8 changed files with 350 additions and 287 deletions

View File

@ -29,7 +29,7 @@ OBJS = $(addprefix $(BUILDDIR)/$(TARGET)/, \
# Hardware.
OBJS += $(addprefix $(BUILDDIR)/$(TARGET)/, \
bpmp.o clock.o cluster.o di.o gpio.o i2c.o irq.o mc.o sdram.o \
pinmux.o se.o smmu.o timer.o tsec.o uart.o \
pinmux.o se.o smmu.o tsec.o uart.o \
fuse.o kfuse.o minerva.o \
sdmmc.o sdmmc_driver.o emummc.o nx_emmc.o nx_sd.o \
bq24193.o max17050.o max7762x.o max77620-rtc.o \

View File

@ -1,6 +1,6 @@
/*
* Copyright (c) 2018 naehrwert
* Copyright (c) 2018 CTCaer
* Copyright (c) 2018-2019 CTCaer
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
@ -60,16 +60,16 @@ void display_init()
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_W_SET) = 0x80000; // Set enable clock DSIA_LP.
CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_DSIA_LP) = 10; // Set PLLP_OUT and div 6 (68MHz).
// Disable deap power down.
// Disable deep power down.
PMC(APBDEV_PMC_IO_DPD_REQ) = 0x40000000;
PMC(APBDEV_PMC_IO_DPD2_REQ) = 0x40000000;
// Config LCD and Backlight pins.
PINMUX_AUX(PINMUX_AUX_NFC_EN) &= ~PINMUX_TRISTATE;
PINMUX_AUX(PINMUX_AUX_NFC_INT) &= ~PINMUX_TRISTATE;
PINMUX_AUX(PINMUX_AUX_LCD_BL_PWM) &= ~PINMUX_TRISTATE;
PINMUX_AUX(PINMUX_AUX_LCD_BL_EN) &= ~PINMUX_TRISTATE;
PINMUX_AUX(PINMUX_AUX_LCD_RST) &= ~PINMUX_TRISTATE;
PINMUX_AUX(PINMUX_AUX_NFC_EN) &= ~PINMUX_TRISTATE; // PULL_DOWN
PINMUX_AUX(PINMUX_AUX_NFC_INT) &= ~PINMUX_TRISTATE; // PULL_DOWN
PINMUX_AUX(PINMUX_AUX_LCD_BL_PWM) &= ~PINMUX_TRISTATE; // PULL_DOWN | 1
PINMUX_AUX(PINMUX_AUX_LCD_BL_EN) &= ~PINMUX_TRISTATE; // PULL_DOWN
PINMUX_AUX(PINMUX_AUX_LCD_RST) &= ~PINMUX_TRISTATE; // PULL_DOWN
// Set Backlight +-5V pins mode and direction
gpio_config(GPIO_PORT_I, GPIO_PIN_0 | GPIO_PIN_1, GPIO_MODE_GPIO);
@ -87,14 +87,18 @@ void display_init()
gpio_write(GPIO_PORT_V, GPIO_PIN_1, GPIO_HIGH); // Enable Backlight EN.
// Power up supply regulator for display interface.
MIPI_CAL(MIPI_CAL_MIPI_BIAS_PAD_CFG2) = 0;
MIPI_CAL(_DSIREG(MIPI_CAL_MIPI_BIAS_PAD_CFG2)) = 0;
// Set DISP1 clock source and parrent clock.
exec_cfg((u32 *)CLOCK_BASE, _display_config_1, 4);
// Set DISP1 clock source and parent clock.
CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_DISP1) = 0x40000000; // PLLD_OUT.
u32 plld_div = (3 << 20) | (20 << 11) | 1; // DIVM: 1, DIVN: 20, DIVP: 3. PLLD_OUT: 768 MHz, PLLD_OUT0 (DSI): 96 MHz.
CLOCK(CLK_RST_CONTROLLER_PLLD_BASE) = PLLCX_BASE_ENABLE | PLLCX_BASE_LOCK | plld_div;
CLOCK(CLK_RST_CONTROLLER_PLLD_MISC1) = 0x20; // PLLD_SETUP.
CLOCK(CLK_RST_CONTROLLER_PLLD_MISC) = 0x2D0AAA; // PLLD_ENABLE_CLK.
// Setup display communication interfaces.
exec_cfg((u32 *)DISPLAY_A_BASE, _display_config_2, 94);
exec_cfg((u32 *)DSI_BASE, _display_config_3, 61);
exec_cfg((u32 *)DISPLAY_A_BASE, _display_dc_setup_win_config, 94);
exec_cfg((u32 *)DSI_BASE, _display_dsi_init_config, 61);
usleep(10000);
// Enable Backlight Reset.
@ -118,7 +122,7 @@ void display_init()
_display_ver = DSI(_DSIREG(DSI_RD_DATA));
if (_display_ver == 0x10)
exec_cfg((u32 *)DSI_BASE, _display_config_4, 43);
exec_cfg((u32 *)DSI_BASE, _display_init_config_jdi, 43);
DSI(_DSIREG(DSI_WR_DATA)) = 0x1105; // MIPI_DCS_EXIT_SLEEP_MODE
DSI(_DSIREG(DSI_TRIGGER)) = DSI_TRIGGER_HOST;
@ -131,22 +135,25 @@ void display_init()
usleep(20000);
// Configure PLLD for DISP1.
exec_cfg((u32 *)CLOCK_BASE, _display_config_6, 3);
plld_div = (1 << 20) | (24 << 11) | 1; // DIVM: 1, DIVN: 24, DIVP: 1. PLLD_OUT: 768 MHz, PLLD_OUT0 (DSI): 460.8 MHz.
CLOCK(CLK_RST_CONTROLLER_PLLD_BASE) = PLLCX_BASE_ENABLE | PLLCX_BASE_LOCK | plld_div;
CLOCK(CLK_RST_CONTROLLER_PLLD_MISC1) = 0x20;
CLOCK(CLK_RST_CONTROLLER_PLLD_MISC) = 0x2DFC00; // Use new PLLD_SDM_DIN.
// Finalize DSI configuration.
exec_cfg((u32 *)DSI_BASE, _display_config_5, 21);
DISPLAY_A(_DIREG(DC_DISP_DISP_CLOCK_CONTROL)) = 4;
exec_cfg((u32 *)DSI_BASE, _display_config_7, 10);
exec_cfg((u32 *)DSI_BASE, _display_dsi_packet_config, 21);
DISPLAY_A(_DIREG(DC_DISP_DISP_CLOCK_CONTROL)) = 4; // PCD1 | div3.
exec_cfg((u32 *)DSI_BASE, _display_dsi_mode_config, 10);
usleep(10000);
// Calibrate display communication pads.
exec_cfg((u32 *)MIPI_CAL_BASE, _display_config_8, 6);
exec_cfg((u32 *)DSI_BASE, _display_config_9, 4);
exec_cfg((u32 *)MIPI_CAL_BASE, _display_config_10, 16);
exec_cfg((u32 *)MIPI_CAL_BASE, _display_mipi_pad_cal_config, 6);
exec_cfg((u32 *)DSI_BASE, _display_dsi_pad_cal_config, 4);
exec_cfg((u32 *)MIPI_CAL_BASE, _display_mipi_apply_dsi_cal_config, 16);
usleep(10000);
// Enable video display controller.
exec_cfg((u32 *)DISPLAY_A_BASE, _display_config_11, 113);
exec_cfg((u32 *)DISPLAY_A_BASE, _display_video_disp_controller_enable_config, 113);
}
void display_backlight_pwm_init()
@ -197,20 +204,20 @@ void display_end()
{
display_backlight_brightness(0, 1000);
DSI(_DSIREG(DSI_VIDEO_MODE_CONTROL)) = 1;
DSI(_DSIREG(DSI_VIDEO_MODE_CONTROL)) = DSI_CMD_PKT_VID_ENABLE;
DSI(_DSIREG(DSI_WR_DATA)) = 0x2805; // MIPI_DCS_SET_DISPLAY_OFF
DISPLAY_A(_DIREG(DC_CMD_STATE_ACCESS)) = READ_MUX | WRITE_MUX;
DSI(_DSIREG(DSI_VIDEO_MODE_CONTROL)) = 0; // Disable host cmd packet.
// De-initialize video controller.
exec_cfg((u32 *)DISPLAY_A_BASE, _display_config_12, 17);
exec_cfg((u32 *)DSI_BASE, _display_config_13, 16);
exec_cfg((u32 *)DISPLAY_A_BASE, _display_video_disp_controller_disable_config, 17);
exec_cfg((u32 *)DSI_BASE, _display_dsi_timing_deinit_config, 16);
usleep(10000);
// De-initialize display panel.
if (_display_ver == 0x10)
exec_cfg((u32 *)DSI_BASE, _display_config_14, 22);
exec_cfg((u32 *)DSI_BASE, _display_deinit_config_jdi, 22);
DSI(_DSIREG(DSI_WR_DATA)) = 0x1005; // MIPI_DCS_ENTER_SLEEP_MODE
DSI(_DSIREG(DSI_TRIGGER)) = DSI_TRIGGER_HOST;

View File

@ -1,6 +1,6 @@
/*
* Copyright (c) 2018 naehrwert
* Copyright (c) 2018 CTCaer
* Copyright (c) 2018-2019 CTCaer
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
@ -187,6 +187,13 @@
#define CSC_ENABLE (1 << 18)
#define WIN_ENABLE (1 << 30)
#define DC_WIN_BUFFER_CONTROL 0x702
#define BUFFER_CONTROL_HOST 0
#define BUFFER_CONTROL_VI 1
#define BUFFER_CONTROL_EPP 2
#define BUFFER_CONTROL_MPEGE 3
#define BUFFER_CONTROL_SB2D 4
#define DC_WIN_COLOR_DEPTH 0x703
#define WIN_COLOR_DEPTH_P1 0x0
#define WIN_COLOR_DEPTH_P2 0x1
@ -336,6 +343,7 @@
#define DSI_PAD_CONTROL_CD 0x4C
#define DSI_VIDEO_MODE_CONTROL 0x4E
#define DSI_CMD_PKT_VID_ENABLE 1
#define DSI_PAD_CONTROL_1 0x4F
#define DSI_PAD_CONTROL_2 0x50
@ -349,7 +357,39 @@
#define DSI_PAD_CONTROL_4 0x52
#define DSI_INIT_SEQ_DATA_15 0x5F
#define MIPI_CAL_MIPI_BIAS_PAD_CFG2 0x60
/*! MIPI registers. */
#define MIPI_CAL_MIPI_CAL_CTRL (0x00 / 0x4)
#define MIPI_CAL_CIL_MIPI_CAL_STATUS (0x08 / 0x4)
#define MIPI_CAL_CILA_MIPI_CAL_CONFIG (0x14 / 0x4)
#define MIPI_CAL_CILB_MIPI_CAL_CONFIG (0x18 / 0x4)
#define MIPI_CAL_CILC_MIPI_CAL_CONFIG (0x1C / 0x4)
#define MIPI_CAL_CILD_MIPI_CAL_CONFIG (0x20 / 0x4)
#define MIPI_CAL_CILE_MIPI_CAL_CONFIG (0x24 / 0x4)
#define MIPI_CAL_CILF_MIPI_CAL_CONFIG (0x28 / 0x4)
#define MIPI_CAL_DSIA_MIPI_CAL_CONFIG (0x38 / 0x4)
#define MIPI_CAL_DSIB_MIPI_CAL_CONFIG (0x3C / 0x4)
#define MIPI_CAL_DSIC_MIPI_CAL_CONFIG (0x40 / 0x4)
#define MIPI_CAL_DSID_MIPI_CAL_CONFIG (0x44 / 0x4)
#define MIPI_CAL_MIPI_BIAS_PAD_CFG0 (0x58 / 0x4)
#define MIPI_CAL_MIPI_BIAS_PAD_CFG1 (0x5C / 0x4)
#define MIPI_CAL_MIPI_BIAS_PAD_CFG2 (0x60 / 0x4)
#define MIPI_CAL_DSIA_MIPI_CAL_CONFIG_2 (0x64 / 0x4)
#define MIPI_CAL_DSIB_MIPI_CAL_CONFIG_2 (0x68 / 0x4)
#define MIPI_CAL_DSIC_MIPI_CAL_CONFIG_2 (0x70 / 0x4)
#define MIPI_CAL_DSID_MIPI_CAL_CONFIG_2 (0x74 / 0x4)
/*! MIPI CMDs. */
#define MIPI_DSI_DCS_SHORT_WRITE 0x05
#define MIPI_DSI_DCS_READ 0x06
#define MIPI_DSI_DCS_SHORT_WRITE_PARAM 0x15
#define MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE 0x37
#define MIPI_DSI_DCS_LONG_WRITE 0x39
/*! MIPI DCS CMDs. */
#define MIPI_DCS_GET_DISPLAY_ID 0x04
#define MIPI_DCS_ENTER_SLEEP_MODE 0x10
#define MIPI_DCS_EXIT_SLEEP_MODE 0x11
#define MIPI_DCS_SET_DISPLAY_ON 0x29
void display_init();
void display_backlight_pwm_init();

View File

@ -1,6 +1,6 @@
/*
* Copyright (c) 2018 naehrwert
* Copyright (c) 2018 CTCaer
* Copyright (c) 2018-2019 CTCaer
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
@ -15,16 +15,8 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
//Clock config.
static const cfg_op_t _display_config_1[4] = {
{0x4E, 0x40000000}, //CLK_RST_CONTROLLER_CLK_SOURCE_DISP1
{0x34, 0x4830A001}, //CLK_RST_CONTROLLER_PLLD_BASE
{0x36, 0x20}, //CLK_RST_CONTROLLER_PLLD_MISC1
{0x37, 0x2D0AAA} //CLK_RST_CONTROLLER_PLLD_MISC
};
//Display A config.
static const cfg_op_t _display_config_2[94] = {
static const cfg_op_t _display_dc_setup_win_config[94] = {
{DC_CMD_STATE_ACCESS, 0},
{DC_CMD_STATE_CONTROL, GENERAL_UPDATE},
{DC_CMD_STATE_CONTROL, GENERAL_ACT_REQ},
@ -128,7 +120,7 @@ static const cfg_op_t _display_config_2[94] = {
};
//DSI Init config.
static const cfg_op_t _display_config_3[61] = {
static const cfg_op_t _display_dsi_init_config[61] = {
{DSI_WR_DATA, 0},
{DSI_INT_ENABLE, 0},
{DSI_INT_STATUS, 0},
@ -192,14 +184,14 @@ static const cfg_op_t _display_config_3[61] = {
{DSI_INIT_SEQ_CONTROL, 0}
};
//DSI config (if ver == 0x10).
static const cfg_op_t _display_config_4[43] = {
{DSI_WR_DATA, 0x439},
{DSI_WR_DATA, 0x9483FFB9},
//DSI panel config.
static const cfg_op_t _display_init_config_jdi[43] = {
{DSI_WR_DATA, 0x439}, // MIPI_DSI_DCS_LONG_WRITE: 4 bytes.
{DSI_WR_DATA, 0x9483FFB9}, // Enable extension cmd. (Pass: FF 83 94).
{DSI_TRIGGER, DSI_TRIGGER_HOST},
{DSI_WR_DATA, 0xBD15},
{DSI_WR_DATA, 0x00BD15}, // MIPI_DSI_DCS_SHORT_WRITE_PARAM: 0x0BD.
{DSI_TRIGGER, DSI_TRIGGER_HOST},
{DSI_WR_DATA, 0x1939},
{DSI_WR_DATA, 0x1939}, // MIPI_DSI_DCS_LONG_WRITE: 25 bytes.
{DSI_WR_DATA, 0xAAAAAAD8},
{DSI_WR_DATA, 0xAAAAAAEB},
{DSI_WR_DATA, 0xAAEBAAAA},
@ -208,9 +200,9 @@ static const cfg_op_t _display_config_4[43] = {
{DSI_WR_DATA, 0xAAEBAAAA},
{DSI_WR_DATA, 0xAA},
{DSI_TRIGGER, DSI_TRIGGER_HOST},
{DSI_WR_DATA, 0x1BD15},
{DSI_WR_DATA, 0x01BD15}, // MIPI_DSI_DCS_SHORT_WRITE_PARAM: 0x1BD.
{DSI_TRIGGER, DSI_TRIGGER_HOST},
{DSI_WR_DATA, 0x2739},
{DSI_WR_DATA, 0x2739}, // MIPI_DSI_DCS_LONG_WRITE: 39 bytes.
{DSI_WR_DATA, 0xFFFFFFD8},
{DSI_WR_DATA, 0xFFFFFFFF},
{DSI_WR_DATA, 0xFFFFFFFF},
@ -222,25 +214,25 @@ static const cfg_op_t _display_config_4[43] = {
{DSI_WR_DATA, 0xFFFFFFFF},
{DSI_WR_DATA, 0xFFFFFF},
{DSI_TRIGGER, DSI_TRIGGER_HOST},
{DSI_WR_DATA, 0x2BD15},
{DSI_WR_DATA, 0x02BD15}, // MIPI_DSI_DCS_SHORT_WRITE_PARAM: 0x2BD.
{DSI_TRIGGER, DSI_TRIGGER_HOST},
{DSI_WR_DATA, 0xF39},
{DSI_WR_DATA, 0xF39}, // MIPI_DSI_DCS_LONG_WRITE: 15 bytes.
{DSI_WR_DATA, 0xFFFFFFD8},
{DSI_WR_DATA, 0xFFFFFFFF},
{DSI_WR_DATA, 0xFFFFFFFF},
{DSI_WR_DATA, 0xFFFFFF},
{DSI_TRIGGER, DSI_TRIGGER_HOST},
{DSI_WR_DATA, 0xBD15},
{DSI_WR_DATA, 0x00BD15}, // MIPI_DSI_DCS_SHORT_WRITE_PARAM: 0x0BD.
{DSI_TRIGGER, DSI_TRIGGER_HOST},
{DSI_WR_DATA, 0x6D915},
{DSI_WR_DATA, 0x06D915}, // MIPI_DSI_DCS_SHORT_WRITE_PARAM: 0x6D9.
{DSI_TRIGGER, DSI_TRIGGER_HOST},
{DSI_WR_DATA, 0x439},
{DSI_WR_DATA, 0xB9},
{DSI_WR_DATA, 0x439}, // MIPI_DSI_DCS_LONG_WRITE: 4 bytes.
{DSI_WR_DATA, 0x000000B9}, // Disable extension cmd.
{DSI_TRIGGER, DSI_TRIGGER_HOST}
};
//DSI config.
static const cfg_op_t _display_config_5[21] = {
//DSI packet config.
static const cfg_op_t _display_dsi_packet_config[21] = {
{DSI_PAD_CONTROL_1, 0},
{DSI_PHY_TIMING_0, 0x6070601},
{DSI_PHY_TIMING_1, 0x40A0E05},
@ -264,15 +256,8 @@ static const cfg_op_t _display_config_5[21] = {
{DSI_HOST_CONTROL, 0},
};
//Clock config.
static const cfg_op_t _display_config_6[3] = {
{0x34, 0x4810C001}, //CLK_RST_CONTROLLER_PLLD_BASE
{0x36, 0x20}, //CLK_RST_CONTROLLER_PLLD_MISC1
{0x37, 0x2DFC00} //CLK_RST_CONTROLLER_PLLD_MISC
};
//DSI config.
static const cfg_op_t _display_config_7[10] = {
//DSI mode config.
static const cfg_op_t _display_dsi_mode_config[10] = {
{DSI_TRIGGER, 0},
{DSI_CONTROL, 0},
{DSI_SOL_DELAY, 6},
@ -286,17 +271,17 @@ static const cfg_op_t _display_config_7[10] = {
};
//MIPI CAL config.
static const cfg_op_t _display_config_8[6] = {
{0x18, 0}, // MIPI_CAL_MIPI_BIAS_PAD_CFG2
{0x02, 0xF3F10000}, // MIPI_CAL_CIL_MIPI_CAL_STATUS
{0x16, 0}, // MIPI_CAL_MIPI_BIAS_PAD_CFG0
{0x18, 0}, // MIPI_CAL_MIPI_BIAS_PAD_CFG2
{0x18, 0x10010}, // MIPI_CAL_MIPI_BIAS_PAD_CFG2
{0x17, 0x300} // MIPI_CAL_MIPI_BIAS_PAD_CFG1
static const cfg_op_t _display_mipi_pad_cal_config[6] = {
{MIPI_CAL_MIPI_BIAS_PAD_CFG2, 0},
{MIPI_CAL_CIL_MIPI_CAL_STATUS, 0xF3F10000},
{MIPI_CAL_MIPI_BIAS_PAD_CFG0, 0},
{MIPI_CAL_MIPI_BIAS_PAD_CFG2, 0},
{MIPI_CAL_MIPI_BIAS_PAD_CFG2, 0x10010},
{MIPI_CAL_MIPI_BIAS_PAD_CFG1, 0x300}
};
//DSI config.
static const cfg_op_t _display_config_9[4] = {
static const cfg_op_t _display_dsi_pad_cal_config[4] = {
{DSI_PAD_CONTROL_1, 0},
{DSI_PAD_CONTROL_2, 0},
{DSI_PAD_CONTROL_3, DSI_PAD_PREEMP_PD_CLK(0x3) | DSI_PAD_PREEMP_PU_CLK(0x3) | DSI_PAD_PREEMP_PD(0x03) | DSI_PAD_PREEMP_PU(0x3)},
@ -304,27 +289,27 @@ static const cfg_op_t _display_config_9[4] = {
};
//MIPI CAL config.
static const cfg_op_t _display_config_10[16] = {
{0x0E, 0x200200}, // MIPI_CAL_DSIA_MIPI_CAL_CONFIG
{0x0F, 0x200200}, // MIPI_CAL_DSIB_MIPI_CAL_CONFIG
{0x19, 0x200002}, // MIPI_CAL_DSIA_MIPI_CAL_CONFIG_2
{0x1A, 0x200002}, // MIPI_CAL_DSIB_MIPI_CAL_CONFIG_2
{0x05, 0}, // MIPI_CAL_CILA_MIPI_CAL_CONFIG
{0x06, 0}, // MIPI_CAL_CILB_MIPI_CAL_CONFIG
{0x07, 0}, // MIPI_CAL_CILC_MIPI_CAL_CONFIG
{0x08, 0}, // MIPI_CAL_CILD_MIPI_CAL_CONFIG
{0x09, 0}, // MIPI_CAL_CILE_MIPI_CAL_CONFIG
{0x0A, 0}, // MIPI_CAL_CILF_MIPI_CAL_CONFIG
{0x10, 0}, // MIPI_CAL_DSIC_MIPI_CAL_CONFIG
{0x11, 0}, // MIPI_CAL_DSID_MIPI_CAL_CONFIG
{0x1A, 0}, // MIPI_CAL_DSIB_MIPI_CAL_CONFIG_2
{0x1C, 0}, // MIPI_CAL_DSIC_MIPI_CAL_CONFIG_2
{0x1D, 0}, // MIPI_CAL_DSID_MIPI_CAL_CONFIG_2
{0, 0x2A000001} // MIPI_CAL_DSIA_MIPI_CAL_CONFIG
static const cfg_op_t _display_mipi_apply_dsi_cal_config[16] = {
{MIPI_CAL_DSIA_MIPI_CAL_CONFIG, 0x200200},
{MIPI_CAL_DSIB_MIPI_CAL_CONFIG, 0x200200},
{MIPI_CAL_DSIA_MIPI_CAL_CONFIG_2, 0x200002},
{MIPI_CAL_DSIB_MIPI_CAL_CONFIG_2, 0x200002},
{MIPI_CAL_CILA_MIPI_CAL_CONFIG, 0},
{MIPI_CAL_CILB_MIPI_CAL_CONFIG, 0},
{MIPI_CAL_CILC_MIPI_CAL_CONFIG, 0},
{MIPI_CAL_CILD_MIPI_CAL_CONFIG, 0},
{MIPI_CAL_CILE_MIPI_CAL_CONFIG, 0},
{MIPI_CAL_CILF_MIPI_CAL_CONFIG, 0},
{MIPI_CAL_DSIC_MIPI_CAL_CONFIG, 0},
{MIPI_CAL_DSID_MIPI_CAL_CONFIG, 0},
{MIPI_CAL_DSIB_MIPI_CAL_CONFIG_2, 0},
{MIPI_CAL_DSIC_MIPI_CAL_CONFIG_2, 0},
{MIPI_CAL_DSID_MIPI_CAL_CONFIG_2, 0},
{MIPI_CAL_MIPI_CAL_CTRL, 0x2A000001}
};
//Display A config.
static const cfg_op_t _display_config_11[113] = {
static const cfg_op_t _display_video_disp_controller_enable_config[113] = {
{DC_CMD_STATE_ACCESS, 0},
{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_A_SELECT},
{DC_WIN_WIN_OPTIONS, 0},
@ -449,7 +434,7 @@ static const cfg_op_t _display_config_11[113] = {
};
////Display A config.
static const cfg_op_t _display_config_12[17] = {
static const cfg_op_t _display_video_disp_controller_disable_config[17] = {
{DC_DISP_FRONT_PORCH, 0xA0088},
{DC_CMD_INT_MASK, 0},
{DC_CMD_STATE_ACCESS, 0},
@ -470,7 +455,7 @@ static const cfg_op_t _display_config_12[17] = {
};
//DSI config.
static const cfg_op_t _display_config_13[16] = {
static const cfg_op_t _display_dsi_timing_deinit_config[16] = {
{DSI_POWER_CONTROL, 0},
{DSI_PAD_CONTROL_1, 0},
{DSI_PHY_TIMING_0, 0x6070601},
@ -490,11 +475,11 @@ static const cfg_op_t _display_config_13[16] = {
};
//DSI config (if ver == 0x10).
static const cfg_op_t _display_config_14[22] = {
{DSI_WR_DATA, 0x439},
{DSI_WR_DATA, 0x9483FFB9},
static const cfg_op_t _display_deinit_config_jdi[22] = {
{DSI_WR_DATA, 0x439}, // MIPI_DSI_DCS_LONG_WRITE: 4 bytes.
{DSI_WR_DATA, 0x9483FFB9}, // Enable extension cmd. (Pass: FF 83 94).
{DSI_TRIGGER, DSI_TRIGGER_HOST},
{DSI_WR_DATA, 0x2139},
{DSI_WR_DATA, 0x2139}, // MIPI_DSI_DCS_LONG_WRITE: 33 bytes.
{DSI_WR_DATA, 0x191919D5},
{DSI_WR_DATA, 0x19191919},
{DSI_WR_DATA, 0x19191919},
@ -505,60 +490,60 @@ static const cfg_op_t _display_config_14[22] = {
{DSI_WR_DATA, 0x19191919},
{DSI_WR_DATA, 0x19},
{DSI_TRIGGER, DSI_TRIGGER_HOST},
{DSI_WR_DATA, 0xB39},
{DSI_WR_DATA, 0x4F0F41B1},
{DSI_WR_DATA, 0xB39}, // MIPI_DSI_DCS_LONG_WRITE: 11 bytes.
{DSI_WR_DATA, 0x4F0F41B1}, // Set Power control.
{DSI_WR_DATA, 0xF179A433},
{DSI_WR_DATA, 0x2D81},
{DSI_WR_DATA, 0x002D81},
{DSI_TRIGGER, DSI_TRIGGER_HOST},
{DSI_WR_DATA, 0x439},
{DSI_WR_DATA, 0xB9},
{DSI_WR_DATA, 0x439}, // MIPI_DSI_DCS_LONG_WRITE: 4 bytes.
{DSI_WR_DATA, 0x000000B9}, // Disable extension cmd.
{DSI_TRIGGER, DSI_TRIGGER_HOST}
};
//Display A config.
static const cfg_op_t cfg_display_one_color[8] = {
{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_A_SELECT}, //Enable window A.
{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_A_SELECT},
{DC_WIN_WIN_OPTIONS, 0},
{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_B_SELECT}, //Enable window B.
{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_B_SELECT},
{DC_WIN_WIN_OPTIONS, 0},
{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_C_SELECT}, //Enable window C.
{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_C_SELECT},
{DC_WIN_WIN_OPTIONS, 0},
{DC_DISP_DISP_WIN_OPTIONS, DSI_ENABLE}, //DSI_ENABLE
{DC_CMD_DISPLAY_COMMAND, DISP_CTRL_MODE_C_DISPLAY} //DISPLAY_CTRL_MODE: continuous display.
{DC_DISP_DISP_WIN_OPTIONS, DSI_ENABLE},
{DC_CMD_DISPLAY_COMMAND, DISP_CTRL_MODE_C_DISPLAY} // Continuous display.
};
//Display A config.
static const cfg_op_t cfg_display_framebuffer[32] = {
{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_C_SELECT}, //Enable window C.
{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_C_SELECT},
{DC_WIN_WIN_OPTIONS, 0},
{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_B_SELECT}, //Enable window B.
{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_B_SELECT},
{DC_WIN_WIN_OPTIONS, 0},
{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_A_SELECT}, //Enable window A.
{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_A_SELECT},
{DC_WIN_WIN_OPTIONS, 0},
{DC_DISP_DISP_WIN_OPTIONS, DSI_ENABLE}, //DSI_ENABLE
{DC_WIN_COLOR_DEPTH, WIN_COLOR_DEPTH_B8G8R8A8}, //T_A8R8G8B8 //NX Default: T_A8B8G8R8, WIN_COLOR_DEPTH_R8G8B8A8
{DC_DISP_DISP_WIN_OPTIONS, DSI_ENABLE},
{DC_WIN_COLOR_DEPTH, WIN_COLOR_DEPTH_B8G8R8A8}, //NX Default: T_A8B8G8R8, WIN_COLOR_DEPTH_R8G8B8A8
{DC_WIN_WIN_OPTIONS, 0},
{DC_WIN_WIN_OPTIONS, 0},
{DC_WIN_POSITION, 0}, //(0,0)
{DC_WIN_H_INITIAL_DDA, 0},
{DC_WIN_V_INITIAL_DDA, 0},
{DC_WIN_PRESCALED_SIZE, V_PRESCALED_SIZE(1280) | H_PRESCALED_SIZE(2880)}, //Pre-scaled size: 1280x2880 bytes.
{DC_WIN_DDA_INC, V_DDA_INC(0x1000) | H_DDA_INC(0x1000)},
{DC_WIN_SIZE, V_SIZE(1280) | H_SIZE(720)}, //Window size: 1280 vertical lines x 720 horizontal pixels.
{DC_WIN_LINE_STRIDE, UV_LINE_STRIDE(720 * 2) | LINE_STRIDE(720 * 4)}, //768*2x768*4 (= 0x600 x 0xC00) bytes, see TRM for alignment requirements.
{DC_WIN_BUFFER_CONTROL, 0},
{DC_WINBUF_SURFACE_KIND, 0}, //Regular surface.
{DC_WIN_PRESCALED_SIZE, V_PRESCALED_SIZE(1280) | H_PRESCALED_SIZE(2880)},
{DC_WIN_DDA_INC, V_DDA_INC(0x1000) | H_DDA_INC(0x1000)}, // 1.0x
{DC_WIN_SIZE, V_SIZE(1280) | H_SIZE(720)},
{DC_WIN_LINE_STRIDE, UV_LINE_STRIDE(720 * 2) | LINE_STRIDE(720 * 4)}, // 720*2x720*4 (= 0x600 x 0xC00) bytes, see TRM for alignment requirements.
{DC_WIN_BUFFER_CONTROL, BUFFER_CONTROL_HOST},
{DC_WINBUF_SURFACE_KIND, PITCH},
{DC_WINBUF_START_ADDR, IPL_FB_ADDRESS}, // Framebuffer address.
{DC_WINBUF_ADDR_H_OFFSET, 0},
{DC_WINBUF_ADDR_V_OFFSET, 0},
{DC_WIN_WIN_OPTIONS, 0},
{DC_DISP_DISP_WIN_OPTIONS, DSI_ENABLE}, //DSI_ENABLE
{DC_DISP_DISP_WIN_OPTIONS, DSI_ENABLE},
{DC_WIN_WIN_OPTIONS, 0},
{DC_DISP_DISP_WIN_OPTIONS, DSI_ENABLE}, //DSI_ENABLE
{DC_DISP_DISP_WIN_OPTIONS, DSI_ENABLE},
{DC_WIN_WIN_OPTIONS, 0},
{DC_DISP_DISP_WIN_OPTIONS, DSI_ENABLE}, //DSI_ENABLE
{DC_WIN_WIN_OPTIONS, WIN_ENABLE}, //Enable window AD.
{DC_CMD_DISPLAY_COMMAND, DISP_CTRL_MODE_C_DISPLAY}, //DISPLAY_CTRL_MODE: continuous display.
{DC_CMD_STATE_CONTROL, GENERAL_UPDATE | WIN_A_UPDATE}, //General update; window A update.
{DC_CMD_STATE_CONTROL, GENERAL_ACT_REQ | WIN_A_ACT_REQ} //General activation request; window A activation request.
{DC_DISP_DISP_WIN_OPTIONS, DSI_ENABLE},
{DC_WIN_WIN_OPTIONS, WIN_ENABLE}, // Enable window AD.
{DC_CMD_DISPLAY_COMMAND, DISP_CTRL_MODE_C_DISPLAY}, // Continuous display.
{DC_CMD_STATE_CONTROL, GENERAL_UPDATE | WIN_A_UPDATE},
{DC_CMD_STATE_CONTROL, GENERAL_ACT_REQ | WIN_A_ACT_REQ}
};

View File

@ -94,7 +94,7 @@ static gui_status_bar_ctx status_bar;
static void _nyx_disp_init()
{
display_backlight_brightness(0, 1000);
display_init_framebuffer();
display_init_framebuffer_pitch();
display_backlight_brightness(h_cfg.backlight - 20, 1000);
}

View File

@ -1,6 +1,6 @@
/*
* Copyright (c) 2018 naehrwert
* Copyright (c) 2018 CTCaer
* Copyright (c) 2018-2019 CTCaer
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
@ -60,16 +60,16 @@ void display_init()
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_W_SET) = 0x80000; // Set enable clock DSIA_LP.
CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_DSIA_LP) = 10; // Set PLLP_OUT and div 6 (68MHz).
// Disable deap power down.
// Disable deep power down.
PMC(APBDEV_PMC_IO_DPD_REQ) = 0x40000000;
PMC(APBDEV_PMC_IO_DPD2_REQ) = 0x40000000;
// Config LCD and Backlight pins.
PINMUX_AUX(PINMUX_AUX_NFC_EN) &= ~PINMUX_TRISTATE;
PINMUX_AUX(PINMUX_AUX_NFC_INT) &= ~PINMUX_TRISTATE;
PINMUX_AUX(PINMUX_AUX_LCD_BL_PWM) &= ~PINMUX_TRISTATE;
PINMUX_AUX(PINMUX_AUX_LCD_BL_EN) &= ~PINMUX_TRISTATE;
PINMUX_AUX(PINMUX_AUX_LCD_RST) &= ~PINMUX_TRISTATE;
PINMUX_AUX(PINMUX_AUX_NFC_EN) &= ~PINMUX_TRISTATE; // PULL_DOWN
PINMUX_AUX(PINMUX_AUX_NFC_INT) &= ~PINMUX_TRISTATE; // PULL_DOWN
PINMUX_AUX(PINMUX_AUX_LCD_BL_PWM) &= ~PINMUX_TRISTATE; // PULL_DOWN | 1
PINMUX_AUX(PINMUX_AUX_LCD_BL_EN) &= ~PINMUX_TRISTATE; // PULL_DOWN
PINMUX_AUX(PINMUX_AUX_LCD_RST) &= ~PINMUX_TRISTATE; // PULL_DOWN
// Set Backlight +-5V pins mode and direction
gpio_config(GPIO_PORT_I, GPIO_PIN_0 | GPIO_PIN_1, GPIO_MODE_GPIO);
@ -87,14 +87,18 @@ void display_init()
gpio_write(GPIO_PORT_V, GPIO_PIN_1, GPIO_HIGH); // Enable Backlight EN.
// Power up supply regulator for display interface.
MIPI_CAL(MIPI_CAL_MIPI_BIAS_PAD_CFG2) = 0;
MIPI_CAL(_DSIREG(MIPI_CAL_MIPI_BIAS_PAD_CFG2)) = 0;
// Set DISP1 clock source and parrent clock.
exec_cfg((u32 *)CLOCK_BASE, _display_config_1, 4);
// Set DISP1 clock source and parent clock.
CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_DISP1) = 0x40000000; // PLLD_OUT.
u32 plld_div = (3 << 20) | (20 << 11) | 1; // DIVM: 1, DIVN: 20, DIVP: 3. PLLD_OUT: 768 MHz, PLLD_OUT0 (DSI): 96 MHz.
CLOCK(CLK_RST_CONTROLLER_PLLD_BASE) = PLLCX_BASE_ENABLE | PLLCX_BASE_LOCK | plld_div;
CLOCK(CLK_RST_CONTROLLER_PLLD_MISC1) = 0x20; // PLLD_SETUP.
CLOCK(CLK_RST_CONTROLLER_PLLD_MISC) = 0x2D0AAA; // PLLD_ENABLE_CLK.
// Setup display communication interfaces.
exec_cfg((u32 *)DISPLAY_A_BASE, _display_config_2, 94);
exec_cfg((u32 *)DSI_BASE, _display_config_3, 61);
exec_cfg((u32 *)DISPLAY_A_BASE, _display_dc_setup_win_config, 94);
exec_cfg((u32 *)DSI_BASE, _display_dsi_init_config, 61);
usleep(10000);
// Enable Backlight Reset.
@ -118,7 +122,7 @@ void display_init()
_display_ver = DSI(_DSIREG(DSI_RD_DATA));
if (_display_ver == 0x10)
exec_cfg((u32 *)DSI_BASE, _display_config_4, 43);
exec_cfg((u32 *)DSI_BASE, _display_init_config_jdi, 43);
DSI(_DSIREG(DSI_WR_DATA)) = 0x1105; // MIPI_DCS_EXIT_SLEEP_MODE
DSI(_DSIREG(DSI_TRIGGER)) = DSI_TRIGGER_HOST;
@ -131,22 +135,25 @@ void display_init()
usleep(20000);
// Configure PLLD for DISP1.
exec_cfg((u32 *)CLOCK_BASE, _display_config_6, 3);
plld_div = (1 << 20) | (24 << 11) | 1; // DIVM: 1, DIVN: 24, DIVP: 1. PLLD_OUT: 768 MHz, PLLD_OUT0 (DSI): 460.8 MHz.
CLOCK(CLK_RST_CONTROLLER_PLLD_BASE) = PLLCX_BASE_ENABLE | PLLCX_BASE_LOCK | plld_div;
CLOCK(CLK_RST_CONTROLLER_PLLD_MISC1) = 0x20;
CLOCK(CLK_RST_CONTROLLER_PLLD_MISC) = 0x2DFC00; // Use new PLLD_SDM_DIN.
// Finalize DSI configuration.
exec_cfg((u32 *)DSI_BASE, _display_config_5, 21);
DISPLAY_A(_DIREG(DC_DISP_DISP_CLOCK_CONTROL)) = 4;
exec_cfg((u32 *)DSI_BASE, _display_config_7, 10);
exec_cfg((u32 *)DSI_BASE, _display_dsi_packet_config, 21);
DISPLAY_A(_DIREG(DC_DISP_DISP_CLOCK_CONTROL)) = 4; // PCD1 | div3.
exec_cfg((u32 *)DSI_BASE, _display_dsi_mode_config, 10);
usleep(10000);
// Calibrate display communication pads.
exec_cfg((u32 *)MIPI_CAL_BASE, _display_config_8, 6);
exec_cfg((u32 *)DSI_BASE, _display_config_9, 4);
exec_cfg((u32 *)MIPI_CAL_BASE, _display_config_10, 16);
exec_cfg((u32 *)MIPI_CAL_BASE, _display_mipi_pad_cal_config, 6);
exec_cfg((u32 *)DSI_BASE, _display_dsi_pad_cal_config, 4);
exec_cfg((u32 *)MIPI_CAL_BASE, _display_mipi_apply_dsi_cal_config, 16);
usleep(10000);
// Enable video display controller.
exec_cfg((u32 *)DISPLAY_A_BASE, _display_config_11, 113);
exec_cfg((u32 *)DISPLAY_A_BASE, _display_video_disp_controller_enable_config, 113);
}
void display_backlight_pwm_init()
@ -197,20 +204,20 @@ void display_end()
{
display_backlight_brightness(0, 1000);
DSI(_DSIREG(DSI_VIDEO_MODE_CONTROL)) = 1;
DSI(_DSIREG(DSI_VIDEO_MODE_CONTROL)) = DSI_CMD_PKT_VID_ENABLE;
DSI(_DSIREG(DSI_WR_DATA)) = 0x2805; // MIPI_DCS_SET_DISPLAY_OFF
DISPLAY_A(_DIREG(DC_CMD_STATE_ACCESS)) = READ_MUX | WRITE_MUX;
DSI(_DSIREG(DSI_VIDEO_MODE_CONTROL)) = 0; // Disable host cmd packet.
// De-initialize video controller.
exec_cfg((u32 *)DISPLAY_A_BASE, _display_config_12, 17);
exec_cfg((u32 *)DSI_BASE, _display_config_13, 16);
exec_cfg((u32 *)DISPLAY_A_BASE, _display_video_disp_controller_disable_config, 17);
exec_cfg((u32 *)DSI_BASE, _display_dsi_timing_deinit_config, 16);
usleep(10000);
// De-initialize display panel.
if (_display_ver == 0x10)
exec_cfg((u32 *)DSI_BASE, _display_config_14, 22);
exec_cfg((u32 *)DSI_BASE, _display_deinit_config_jdi, 22);
DSI(_DSIREG(DSI_WR_DATA)) = 0x1005; // MIPI_DCS_ENTER_SLEEP_MODE
DSI(_DSIREG(DSI_TRIGGER)) = DSI_TRIGGER_HOST;
@ -254,26 +261,24 @@ void display_color_screen(u32 color)
DISPLAY_A(_DIREG(DC_WIN_CD_WIN_OPTIONS)) = 0;
DISPLAY_A(_DIREG(DC_DISP_BLEND_BACKGROUND_COLOR)) = color;
DISPLAY_A(_DIREG(DC_CMD_STATE_CONTROL)) = (DISPLAY_A(_DIREG(DC_CMD_STATE_CONTROL)) & 0xFFFFFFFE) | GENERAL_ACT_REQ;
usleep(35000);
display_backlight(true);
}
u32 *display_init_framebuffer()
u32 *display_init_framebuffer_pitch()
{
// This configures the framebuffer @ NYX_FB_ADDRESS with a resolution of 1280x720 (line stride 720).
exec_cfg((u32 *)DISPLAY_A_BASE, cfg_display_framebuffer, 32);
usleep(35000);
return (u32 *)NYX_FB_ADDRESS;
}
u32 *display_init_framebuffer2()
{
// This configures the framebuffer @ NYX_FB_ADDRESS with a resolution of 1280x720 (line stride 720).
exec_cfg((u32 *)DISPLAY_A_BASE, cfg_display_framebuffer2, 32);
exec_cfg((u32 *)DISPLAY_A_BASE, cfg_display_framebuffer_pitch, 32);
usleep(35000);
return (u32 *)NYX_FB_ADDRESS;
}
u32 *display_init_framebuffer_block()
{
// This configures the framebuffer @ NYX_FB_ADDRESS with a resolution of 1280x720 (line stride 720).
exec_cfg((u32 *)DISPLAY_A_BASE, cfg_display_framebuffer_block, 32);
usleep(35000);

View File

@ -1,6 +1,6 @@
/*
* Copyright (c) 2018 naehrwert
* Copyright (c) 2018 CTCaer
* Copyright (c) 2018-2019 CTCaer
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
@ -187,6 +187,13 @@
#define CSC_ENABLE (1 << 18)
#define WIN_ENABLE (1 << 30)
#define DC_WIN_BUFFER_CONTROL 0x702
#define BUFFER_CONTROL_HOST 0
#define BUFFER_CONTROL_VI 1
#define BUFFER_CONTROL_EPP 2
#define BUFFER_CONTROL_MPEGE 3
#define BUFFER_CONTROL_SB2D 4
#define DC_WIN_COLOR_DEPTH 0x703
#define WIN_COLOR_DEPTH_P1 0x0
#define WIN_COLOR_DEPTH_P2 0x1
@ -336,6 +343,7 @@
#define DSI_PAD_CONTROL_CD 0x4C
#define DSI_VIDEO_MODE_CONTROL 0x4E
#define DSI_CMD_PKT_VID_ENABLE 1
#define DSI_PAD_CONTROL_1 0x4F
#define DSI_PAD_CONTROL_2 0x50
@ -349,7 +357,39 @@
#define DSI_PAD_CONTROL_4 0x52
#define DSI_INIT_SEQ_DATA_15 0x5F
#define MIPI_CAL_MIPI_BIAS_PAD_CFG2 0x60
/*! MIPI registers. */
#define MIPI_CAL_MIPI_CAL_CTRL (0x00 / 0x4)
#define MIPI_CAL_CIL_MIPI_CAL_STATUS (0x08 / 0x4)
#define MIPI_CAL_CILA_MIPI_CAL_CONFIG (0x14 / 0x4)
#define MIPI_CAL_CILB_MIPI_CAL_CONFIG (0x18 / 0x4)
#define MIPI_CAL_CILC_MIPI_CAL_CONFIG (0x1C / 0x4)
#define MIPI_CAL_CILD_MIPI_CAL_CONFIG (0x20 / 0x4)
#define MIPI_CAL_CILE_MIPI_CAL_CONFIG (0x24 / 0x4)
#define MIPI_CAL_CILF_MIPI_CAL_CONFIG (0x28 / 0x4)
#define MIPI_CAL_DSIA_MIPI_CAL_CONFIG (0x38 / 0x4)
#define MIPI_CAL_DSIB_MIPI_CAL_CONFIG (0x3C / 0x4)
#define MIPI_CAL_DSIC_MIPI_CAL_CONFIG (0x40 / 0x4)
#define MIPI_CAL_DSID_MIPI_CAL_CONFIG (0x44 / 0x4)
#define MIPI_CAL_MIPI_BIAS_PAD_CFG0 (0x58 / 0x4)
#define MIPI_CAL_MIPI_BIAS_PAD_CFG1 (0x5C / 0x4)
#define MIPI_CAL_MIPI_BIAS_PAD_CFG2 (0x60 / 0x4)
#define MIPI_CAL_DSIA_MIPI_CAL_CONFIG_2 (0x64 / 0x4)
#define MIPI_CAL_DSIB_MIPI_CAL_CONFIG_2 (0x68 / 0x4)
#define MIPI_CAL_DSIC_MIPI_CAL_CONFIG_2 (0x70 / 0x4)
#define MIPI_CAL_DSID_MIPI_CAL_CONFIG_2 (0x74 / 0x4)
/*! MIPI CMDs. */
#define MIPI_DSI_DCS_SHORT_WRITE 0x05
#define MIPI_DSI_DCS_READ 0x06
#define MIPI_DSI_DCS_SHORT_WRITE_PARAM 0x15
#define MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE 0x37
#define MIPI_DSI_DCS_LONG_WRITE 0x39
/*! MIPI DCS CMDs. */
#define MIPI_DCS_GET_DISPLAY_ID 0x04
#define MIPI_DCS_ENTER_SLEEP_MODE 0x10
#define MIPI_DCS_EXIT_SLEEP_MODE 0x11
#define MIPI_DCS_SET_DISPLAY_ON 0x29
void display_init();
void display_backlight_pwm_init();
@ -363,7 +403,7 @@ void display_backlight(bool enable);
void display_backlight_brightness(u32 brightness, u32 step_delay);
/*! Init display in full 1280x720 resolution (B8G8R8A8, line stride 768, framebuffer size = 1280*768*4 bytes). */
u32 *display_init_framebuffer();
u32 *display_init_framebuffer2();
u32 *display_init_framebuffer_pitch();
u32 *display_init_framebuffer_block();
#endif

View File

@ -1,6 +1,6 @@
/*
* Copyright (c) 2018 naehrwert
* Copyright (c) 2018 CTCaer
* Copyright (c) 2018-2019 CTCaer
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
@ -15,16 +15,8 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
//Clock config.
static const cfg_op_t _display_config_1[4] = {
{0x4E, 0x40000000}, //CLK_RST_CONTROLLER_CLK_SOURCE_DISP1
{0x34, 0x4830A001}, //CLK_RST_CONTROLLER_PLLD_BASE
{0x36, 0x20}, //CLK_RST_CONTROLLER_PLLD_MISC1
{0x37, 0x2D0AAA} //CLK_RST_CONTROLLER_PLLD_MISC
};
//Display A config.
static const cfg_op_t _display_config_2[94] = {
static const cfg_op_t _display_dc_setup_win_config[94] = {
{DC_CMD_STATE_ACCESS, 0},
{DC_CMD_STATE_CONTROL, GENERAL_UPDATE},
{DC_CMD_STATE_CONTROL, GENERAL_ACT_REQ},
@ -128,7 +120,7 @@ static const cfg_op_t _display_config_2[94] = {
};
//DSI Init config.
static const cfg_op_t _display_config_3[61] = {
static const cfg_op_t _display_dsi_init_config[61] = {
{DSI_WR_DATA, 0},
{DSI_INT_ENABLE, 0},
{DSI_INT_STATUS, 0},
@ -192,14 +184,14 @@ static const cfg_op_t _display_config_3[61] = {
{DSI_INIT_SEQ_CONTROL, 0}
};
//DSI config (if ver == 0x10).
static const cfg_op_t _display_config_4[43] = {
{DSI_WR_DATA, 0x439},
{DSI_WR_DATA, 0x9483FFB9},
//DSI panel config.
static const cfg_op_t _display_init_config_jdi[43] = {
{DSI_WR_DATA, 0x439}, // MIPI_DSI_DCS_LONG_WRITE: 4 bytes.
{DSI_WR_DATA, 0x9483FFB9}, // Enable extension cmd. (Pass: FF 83 94).
{DSI_TRIGGER, DSI_TRIGGER_HOST},
{DSI_WR_DATA, 0xBD15},
{DSI_WR_DATA, 0x00BD15}, // MIPI_DSI_DCS_SHORT_WRITE_PARAM: 0x0BD.
{DSI_TRIGGER, DSI_TRIGGER_HOST},
{DSI_WR_DATA, 0x1939},
{DSI_WR_DATA, 0x1939}, // MIPI_DSI_DCS_LONG_WRITE: 25 bytes.
{DSI_WR_DATA, 0xAAAAAAD8},
{DSI_WR_DATA, 0xAAAAAAEB},
{DSI_WR_DATA, 0xAAEBAAAA},
@ -208,9 +200,9 @@ static const cfg_op_t _display_config_4[43] = {
{DSI_WR_DATA, 0xAAEBAAAA},
{DSI_WR_DATA, 0xAA},
{DSI_TRIGGER, DSI_TRIGGER_HOST},
{DSI_WR_DATA, 0x1BD15},
{DSI_WR_DATA, 0x01BD15}, // MIPI_DSI_DCS_SHORT_WRITE_PARAM: 0x1BD.
{DSI_TRIGGER, DSI_TRIGGER_HOST},
{DSI_WR_DATA, 0x2739},
{DSI_WR_DATA, 0x2739}, // MIPI_DSI_DCS_LONG_WRITE: 39 bytes.
{DSI_WR_DATA, 0xFFFFFFD8},
{DSI_WR_DATA, 0xFFFFFFFF},
{DSI_WR_DATA, 0xFFFFFFFF},
@ -222,25 +214,25 @@ static const cfg_op_t _display_config_4[43] = {
{DSI_WR_DATA, 0xFFFFFFFF},
{DSI_WR_DATA, 0xFFFFFF},
{DSI_TRIGGER, DSI_TRIGGER_HOST},
{DSI_WR_DATA, 0x2BD15},
{DSI_WR_DATA, 0x02BD15}, // MIPI_DSI_DCS_SHORT_WRITE_PARAM: 0x2BD.
{DSI_TRIGGER, DSI_TRIGGER_HOST},
{DSI_WR_DATA, 0xF39},
{DSI_WR_DATA, 0xF39}, // MIPI_DSI_DCS_LONG_WRITE: 15 bytes.
{DSI_WR_DATA, 0xFFFFFFD8},
{DSI_WR_DATA, 0xFFFFFFFF},
{DSI_WR_DATA, 0xFFFFFFFF},
{DSI_WR_DATA, 0xFFFFFF},
{DSI_TRIGGER, DSI_TRIGGER_HOST},
{DSI_WR_DATA, 0xBD15},
{DSI_WR_DATA, 0x00BD15}, // MIPI_DSI_DCS_SHORT_WRITE_PARAM: 0x0BD.
{DSI_TRIGGER, DSI_TRIGGER_HOST},
{DSI_WR_DATA, 0x6D915},
{DSI_WR_DATA, 0x06D915}, // MIPI_DSI_DCS_SHORT_WRITE_PARAM: 0x6D9.
{DSI_TRIGGER, DSI_TRIGGER_HOST},
{DSI_WR_DATA, 0x439},
{DSI_WR_DATA, 0xB9},
{DSI_WR_DATA, 0x439}, // MIPI_DSI_DCS_LONG_WRITE: 4 bytes.
{DSI_WR_DATA, 0x000000B9}, // Disable extension cmd.
{DSI_TRIGGER, DSI_TRIGGER_HOST}
};
//DSI config.
static const cfg_op_t _display_config_5[21] = {
//DSI packet config.
static const cfg_op_t _display_dsi_packet_config[21] = {
{DSI_PAD_CONTROL_1, 0},
{DSI_PHY_TIMING_0, 0x6070601},
{DSI_PHY_TIMING_1, 0x40A0E05},
@ -264,15 +256,8 @@ static const cfg_op_t _display_config_5[21] = {
{DSI_HOST_CONTROL, 0},
};
//Clock config.
static const cfg_op_t _display_config_6[3] = {
{0x34, 0x4810C001}, //CLK_RST_CONTROLLER_PLLD_BASE
{0x36, 0x20}, //CLK_RST_CONTROLLER_PLLD_MISC1
{0x37, 0x2DFC00} //CLK_RST_CONTROLLER_PLLD_MISC
};
//DSI config.
static const cfg_op_t _display_config_7[10] = {
//DSI mode config.
static const cfg_op_t _display_dsi_mode_config[10] = {
{DSI_TRIGGER, 0},
{DSI_CONTROL, 0},
{DSI_SOL_DELAY, 6},
@ -286,17 +271,17 @@ static const cfg_op_t _display_config_7[10] = {
};
//MIPI CAL config.
static const cfg_op_t _display_config_8[6] = {
{0x18, 0}, // MIPI_CAL_MIPI_BIAS_PAD_CFG2
{0x02, 0xF3F10000}, // MIPI_CAL_CIL_MIPI_CAL_STATUS
{0x16, 0}, // MIPI_CAL_MIPI_BIAS_PAD_CFG0
{0x18, 0}, // MIPI_CAL_MIPI_BIAS_PAD_CFG2
{0x18, 0x10010}, // MIPI_CAL_MIPI_BIAS_PAD_CFG2
{0x17, 0x300} // MIPI_CAL_MIPI_BIAS_PAD_CFG1
static const cfg_op_t _display_mipi_pad_cal_config[6] = {
{MIPI_CAL_MIPI_BIAS_PAD_CFG2, 0},
{MIPI_CAL_CIL_MIPI_CAL_STATUS, 0xF3F10000},
{MIPI_CAL_MIPI_BIAS_PAD_CFG0, 0},
{MIPI_CAL_MIPI_BIAS_PAD_CFG2, 0},
{MIPI_CAL_MIPI_BIAS_PAD_CFG2, 0x10010},
{MIPI_CAL_MIPI_BIAS_PAD_CFG1, 0x300}
};
//DSI config.
static const cfg_op_t _display_config_9[4] = {
static const cfg_op_t _display_dsi_pad_cal_config[4] = {
{DSI_PAD_CONTROL_1, 0},
{DSI_PAD_CONTROL_2, 0},
{DSI_PAD_CONTROL_3, DSI_PAD_PREEMP_PD_CLK(0x3) | DSI_PAD_PREEMP_PU_CLK(0x3) | DSI_PAD_PREEMP_PD(0x03) | DSI_PAD_PREEMP_PU(0x3)},
@ -304,27 +289,27 @@ static const cfg_op_t _display_config_9[4] = {
};
//MIPI CAL config.
static const cfg_op_t _display_config_10[16] = {
{0x0E, 0x200200}, // MIPI_CAL_DSIA_MIPI_CAL_CONFIG
{0x0F, 0x200200}, // MIPI_CAL_DSIB_MIPI_CAL_CONFIG
{0x19, 0x200002}, // MIPI_CAL_DSIA_MIPI_CAL_CONFIG_2
{0x1A, 0x200002}, // MIPI_CAL_DSIB_MIPI_CAL_CONFIG_2
{0x05, 0}, // MIPI_CAL_CILA_MIPI_CAL_CONFIG
{0x06, 0}, // MIPI_CAL_CILB_MIPI_CAL_CONFIG
{0x07, 0}, // MIPI_CAL_CILC_MIPI_CAL_CONFIG
{0x08, 0}, // MIPI_CAL_CILD_MIPI_CAL_CONFIG
{0x09, 0}, // MIPI_CAL_CILE_MIPI_CAL_CONFIG
{0x0A, 0}, // MIPI_CAL_CILF_MIPI_CAL_CONFIG
{0x10, 0}, // MIPI_CAL_DSIC_MIPI_CAL_CONFIG
{0x11, 0}, // MIPI_CAL_DSID_MIPI_CAL_CONFIG
{0x1A, 0}, // MIPI_CAL_DSIB_MIPI_CAL_CONFIG_2
{0x1C, 0}, // MIPI_CAL_DSIC_MIPI_CAL_CONFIG_2
{0x1D, 0}, // MIPI_CAL_DSID_MIPI_CAL_CONFIG_2
{0, 0x2A000001} // MIPI_CAL_DSIA_MIPI_CAL_CONFIG
static const cfg_op_t _display_mipi_apply_dsi_cal_config[16] = {
{MIPI_CAL_DSIA_MIPI_CAL_CONFIG, 0x200200},
{MIPI_CAL_DSIB_MIPI_CAL_CONFIG, 0x200200},
{MIPI_CAL_DSIA_MIPI_CAL_CONFIG_2, 0x200002},
{MIPI_CAL_DSIB_MIPI_CAL_CONFIG_2, 0x200002},
{MIPI_CAL_CILA_MIPI_CAL_CONFIG, 0},
{MIPI_CAL_CILB_MIPI_CAL_CONFIG, 0},
{MIPI_CAL_CILC_MIPI_CAL_CONFIG, 0},
{MIPI_CAL_CILD_MIPI_CAL_CONFIG, 0},
{MIPI_CAL_CILE_MIPI_CAL_CONFIG, 0},
{MIPI_CAL_CILF_MIPI_CAL_CONFIG, 0},
{MIPI_CAL_DSIC_MIPI_CAL_CONFIG, 0},
{MIPI_CAL_DSID_MIPI_CAL_CONFIG, 0},
{MIPI_CAL_DSIB_MIPI_CAL_CONFIG_2, 0},
{MIPI_CAL_DSIC_MIPI_CAL_CONFIG_2, 0},
{MIPI_CAL_DSID_MIPI_CAL_CONFIG_2, 0},
{MIPI_CAL_MIPI_CAL_CTRL, 0x2A000001}
};
//Display A config.
static const cfg_op_t _display_config_11[113] = {
static const cfg_op_t _display_video_disp_controller_enable_config[113] = {
{DC_CMD_STATE_ACCESS, 0},
{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_A_SELECT},
{DC_WIN_WIN_OPTIONS, 0},
@ -449,7 +434,7 @@ static const cfg_op_t _display_config_11[113] = {
};
////Display A config.
static const cfg_op_t _display_config_12[17] = {
static const cfg_op_t _display_video_disp_controller_disable_config[17] = {
{DC_DISP_FRONT_PORCH, 0xA0088},
{DC_CMD_INT_MASK, 0},
{DC_CMD_STATE_ACCESS, 0},
@ -470,7 +455,7 @@ static const cfg_op_t _display_config_12[17] = {
};
//DSI config.
static const cfg_op_t _display_config_13[16] = {
static const cfg_op_t _display_dsi_timing_deinit_config[16] = {
{DSI_POWER_CONTROL, 0},
{DSI_PAD_CONTROL_1, 0},
{DSI_PHY_TIMING_0, 0x6070601},
@ -490,11 +475,11 @@ static const cfg_op_t _display_config_13[16] = {
};
//DSI config (if ver == 0x10).
static const cfg_op_t _display_config_14[22] = {
{DSI_WR_DATA, 0x439},
{DSI_WR_DATA, 0x9483FFB9},
static const cfg_op_t _display_deinit_config_jdi[22] = {
{DSI_WR_DATA, 0x439}, // MIPI_DSI_DCS_LONG_WRITE: 4 bytes.
{DSI_WR_DATA, 0x9483FFB9}, // Enable extension cmd. (Pass: FF 83 94).
{DSI_TRIGGER, DSI_TRIGGER_HOST},
{DSI_WR_DATA, 0x2139},
{DSI_WR_DATA, 0x2139}, // MIPI_DSI_DCS_LONG_WRITE: 33 bytes.
{DSI_WR_DATA, 0x191919D5},
{DSI_WR_DATA, 0x19191919},
{DSI_WR_DATA, 0x19191919},
@ -505,95 +490,96 @@ static const cfg_op_t _display_config_14[22] = {
{DSI_WR_DATA, 0x19191919},
{DSI_WR_DATA, 0x19},
{DSI_TRIGGER, DSI_TRIGGER_HOST},
{DSI_WR_DATA, 0xB39},
{DSI_WR_DATA, 0x4F0F41B1},
{DSI_WR_DATA, 0xB39}, // MIPI_DSI_DCS_LONG_WRITE: 11 bytes.
{DSI_WR_DATA, 0x4F0F41B1}, // Set Power control.
{DSI_WR_DATA, 0xF179A433},
{DSI_WR_DATA, 0x2D81},
{DSI_WR_DATA, 0x002D81},
{DSI_TRIGGER, DSI_TRIGGER_HOST},
{DSI_WR_DATA, 0x439},
{DSI_WR_DATA, 0xB9},
{DSI_WR_DATA, 0x439}, // MIPI_DSI_DCS_LONG_WRITE: 4 bytes.
{DSI_WR_DATA, 0x000000B9}, // Disable extension cmd.
{DSI_TRIGGER, DSI_TRIGGER_HOST}
};
//Display A config.
static const cfg_op_t cfg_display_one_color[8] = {
{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_A_SELECT}, //Enable window A.
{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_A_SELECT},
{DC_WIN_WIN_OPTIONS, 0},
{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_B_SELECT}, //Enable window B.
{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_B_SELECT},
{DC_WIN_WIN_OPTIONS, 0},
{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_C_SELECT}, //Enable window C.
{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_C_SELECT},
{DC_WIN_WIN_OPTIONS, 0},
{DC_DISP_DISP_WIN_OPTIONS, DSI_ENABLE}, //DSI_ENABLE
{DC_CMD_DISPLAY_COMMAND, DISP_CTRL_MODE_C_DISPLAY} //DISPLAY_CTRL_MODE: continuous display.
{DC_DISP_DISP_WIN_OPTIONS, DSI_ENABLE},
{DC_CMD_DISPLAY_COMMAND, DISP_CTRL_MODE_C_DISPLAY} // Continuous display.
};
//Display A config.
static const cfg_op_t cfg_display_framebuffer[32] = {
{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_C_SELECT}, //Enable window C.
//Display A config pitch.
static const cfg_op_t cfg_display_framebuffer_pitch[32] = {
{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_C_SELECT},
{DC_WIN_WIN_OPTIONS, 0},
{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_B_SELECT}, //Enable window B.
{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_B_SELECT},
{DC_WIN_WIN_OPTIONS, 0},
{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_A_SELECT}, //Enable window A.
{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_A_SELECT},
{DC_WIN_WIN_OPTIONS, 0},
{DC_DISP_DISP_WIN_OPTIONS, DSI_ENABLE}, //DSI_ENABLE
{DC_WIN_COLOR_DEPTH, WIN_COLOR_DEPTH_B8G8R8A8}, //T_A8R8G8B8 //NX Default: T_A8B8G8R8, WIN_COLOR_DEPTH_R8G8B8A8
{DC_DISP_DISP_WIN_OPTIONS, DSI_ENABLE},
{DC_WIN_COLOR_DEPTH, WIN_COLOR_DEPTH_B8G8R8A8}, // NX Default: T_A8B8G8R8, WIN_COLOR_DEPTH_R8G8B8A8.
{DC_WIN_WIN_OPTIONS, 0},
{DC_WIN_WIN_OPTIONS, 0},
{DC_WIN_POSITION, 0}, //(0,0)
{DC_WIN_H_INITIAL_DDA, 0},
{DC_WIN_V_INITIAL_DDA, 0},
{DC_WIN_PRESCALED_SIZE, V_PRESCALED_SIZE(1280) | H_PRESCALED_SIZE(2880)}, //Pre-scaled size: 1280x2880 bytes.
{DC_WIN_DDA_INC, V_DDA_INC(0x1000) | H_DDA_INC(0x1000)},
{DC_WIN_SIZE, V_SIZE(1280) | H_SIZE(720)}, //Window size: 1280 vertical lines x 720 horizontal pixels.
{DC_WIN_LINE_STRIDE, UV_LINE_STRIDE(720 * 2) | LINE_STRIDE(720 * 4)}, //768*2x768*4 (= 0x600 x 0xC00) bytes, see TRM for alignment requirements.
{DC_WIN_BUFFER_CONTROL, 0},
{DC_WINBUF_SURFACE_KIND, 0}, //Regular surface.
{DC_WIN_PRESCALED_SIZE, V_PRESCALED_SIZE(1280) | H_PRESCALED_SIZE(2880)},
{DC_WIN_DDA_INC, V_DDA_INC(0x1000) | H_DDA_INC(0x1000)}, // 1.0x.
{DC_WIN_SIZE, V_SIZE(1280) | H_SIZE(720)},
{DC_WIN_LINE_STRIDE, UV_LINE_STRIDE(720 * 2) | LINE_STRIDE(720 * 4)}, // 720*2x720*4 (= 0x600 x 0xC00) bytes, see TRM for alignment requirements.
{DC_WIN_BUFFER_CONTROL, BUFFER_CONTROL_HOST},
{DC_WINBUF_SURFACE_KIND, PITCH},
{DC_WINBUF_START_ADDR, NYX_FB_ADDRESS}, // Framebuffer address.
{DC_WINBUF_ADDR_H_OFFSET, 0}, //Linear: 0x383FFC, Block: 0x3813FC
{DC_WINBUF_ADDR_V_OFFSET, 1279}, //Linear: 1279, Block: 0
{DC_WINBUF_ADDR_H_OFFSET, 0}, // Linear: 0x383FFC, Block: 0x3813FC.
{DC_WINBUF_ADDR_V_OFFSET, 1279}, // Linear: 1279, Block: 0.
{DC_WIN_WIN_OPTIONS, 0},
{DC_DISP_DISP_WIN_OPTIONS, DSI_ENABLE}, //DSI_ENABLE
{DC_DISP_DISP_WIN_OPTIONS, DSI_ENABLE},
{DC_WIN_WIN_OPTIONS, 0},
{DC_DISP_DISP_WIN_OPTIONS, DSI_ENABLE}, //DSI_ENABLE
{DC_DISP_DISP_WIN_OPTIONS, DSI_ENABLE},
{DC_WIN_WIN_OPTIONS, 0},
{DC_DISP_DISP_WIN_OPTIONS, DSI_ENABLE}, //DSI_ENABLE
{DC_DISP_DISP_WIN_OPTIONS, DSI_ENABLE},
{DC_WIN_WIN_OPTIONS, WIN_ENABLE | V_DIRECTION}, // Enable window AD.
{DC_CMD_DISPLAY_COMMAND, DISP_CTRL_MODE_C_DISPLAY}, //DISPLAY_CTRL_MODE: continuous display.
{DC_CMD_STATE_CONTROL, GENERAL_UPDATE | WIN_A_UPDATE}, //General update; window A update.
{DC_CMD_STATE_CONTROL, GENERAL_ACT_REQ | WIN_A_ACT_REQ} //General activation request; window A activation request.
{DC_CMD_DISPLAY_COMMAND, DISP_CTRL_MODE_C_DISPLAY}, // Continuous display.
{DC_CMD_STATE_CONTROL, GENERAL_UPDATE | WIN_A_UPDATE},
{DC_CMD_STATE_CONTROL, GENERAL_ACT_REQ | WIN_A_ACT_REQ}
};
static const cfg_op_t cfg_display_framebuffer2[32] = {
{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_C_SELECT}, //Enable window C.
//Display A config block linear.
static const cfg_op_t cfg_display_framebuffer_block[32] = {
{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_C_SELECT},
{DC_WIN_WIN_OPTIONS, 0},
{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_B_SELECT}, //Enable window B.
{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_B_SELECT},
{DC_WIN_WIN_OPTIONS, 0},
{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_A_SELECT}, //Enable window A.
{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_A_SELECT},
{DC_WIN_WIN_OPTIONS, 0},
{DC_DISP_DISP_WIN_OPTIONS, DSI_ENABLE}, //DSI_ENABLE
{DC_WIN_COLOR_DEPTH, WIN_COLOR_DEPTH_B8G8R8A8}, //T_A8R8G8B8 //NX Default: T_A8B8G8R8, WIN_COLOR_DEPTH_R8G8B8A8
{DC_DISP_DISP_WIN_OPTIONS, DSI_ENABLE},
{DC_WIN_COLOR_DEPTH, WIN_COLOR_DEPTH_B8G8R8A8}, // NX Default: T_A8B8G8R8, WIN_COLOR_DEPTH_R8G8B8A8.
{DC_WIN_WIN_OPTIONS, 0},
{DC_WIN_WIN_OPTIONS, 0},
{DC_WIN_POSITION, 0}, //(0,0)
{DC_WIN_H_INITIAL_DDA, 0},
{DC_WIN_V_INITIAL_DDA, 0},
{DC_WIN_PRESCALED_SIZE, V_PRESCALED_SIZE(1280) | H_PRESCALED_SIZE(2880)}, //Pre-scaled size: 1280x2880 bytes.
{DC_WIN_DDA_INC, V_DDA_INC(0x1000) | H_DDA_INC(0x1000)},
{DC_WIN_SIZE, V_SIZE(1280) | H_SIZE(720)}, //Window size: 1280 vertical lines x 720 horizontal pixels.
{DC_WIN_LINE_STRIDE, UV_LINE_STRIDE(1280 * 2) | LINE_STRIDE(1280 * 4)}, //768*2x768*4 (= 0x600 x 0xC00) bytes, see TRM for alignment requirements.
{DC_WIN_BUFFER_CONTROL, 0},
{DC_WINBUF_SURFACE_KIND, BLOCK_HEIGHT(4) | BLOCK}, //Regular surface.
{DC_WIN_PRESCALED_SIZE, V_PRESCALED_SIZE(1280) | H_PRESCALED_SIZE(2880)},
{DC_WIN_DDA_INC, V_DDA_INC(0x1000) | H_DDA_INC(0x1000)}, // 1.0x.
{DC_WIN_SIZE, V_SIZE(1280) | H_SIZE(720)},
{DC_WIN_LINE_STRIDE, UV_LINE_STRIDE(1280 * 2) | LINE_STRIDE(1280 * 4)}, //720*2x720*4 (= 0x600 x 0xC00) bytes, see TRM for alignment requirements.
{DC_WIN_BUFFER_CONTROL, BUFFER_CONTROL_HOST},
{DC_WINBUF_SURFACE_KIND, BLOCK_HEIGHT(4) | BLOCK},
{DC_WINBUF_START_ADDR, NYX_FB_ADDRESS}, // Framebuffer address.
{DC_WINBUF_ADDR_H_OFFSET, 0x3813FC}, //Linear: 0x383FFC, Block: 0x3813FC
{DC_WINBUF_ADDR_V_OFFSET, 0}, //Linear: 1279, Block: 0
{DC_WINBUF_ADDR_H_OFFSET, 0x3813FC}, // Linear: 0x383FFC, Block: 0x3813FC.
{DC_WINBUF_ADDR_V_OFFSET, 0}, // Linear: 1279, Block: 0.
{DC_WIN_WIN_OPTIONS, 0},
{DC_DISP_DISP_WIN_OPTIONS, DSI_ENABLE}, //DSI_ENABLE
{DC_DISP_DISP_WIN_OPTIONS, DSI_ENABLE},
{DC_WIN_WIN_OPTIONS, 0},
{DC_DISP_DISP_WIN_OPTIONS, DSI_ENABLE}, //DSI_ENABLE
{DC_DISP_DISP_WIN_OPTIONS, DSI_ENABLE},
{DC_WIN_WIN_OPTIONS, 0},
{DC_DISP_DISP_WIN_OPTIONS, DSI_ENABLE}, //DSI_ENABLE
{DC_WIN_WIN_OPTIONS, WIN_ENABLE | SCAN_COLUMN | H_DIRECTION}, //Enable window AD. | SCAN_COLUMN | H_DIRECTION
{DC_CMD_DISPLAY_COMMAND, DISP_CTRL_MODE_C_DISPLAY}, //DISPLAY_CTRL_MODE: continuous display.
{DC_CMD_STATE_CONTROL, GENERAL_UPDATE | WIN_A_UPDATE}, //General update; window A update.
{DC_CMD_STATE_CONTROL, GENERAL_ACT_REQ | WIN_A_ACT_REQ} //General activation request; window A activation request.
{DC_DISP_DISP_WIN_OPTIONS, DSI_ENABLE},
{DC_WIN_WIN_OPTIONS, WIN_ENABLE | SCAN_COLUMN | H_DIRECTION}, // Enable window AD. | SCAN_COLUMN | H_DIRECTION.
{DC_CMD_DISPLAY_COMMAND, DISP_CTRL_MODE_C_DISPLAY}, // Continuous display.
{DC_CMD_STATE_CONTROL, GENERAL_UPDATE | WIN_A_UPDATE},
{DC_CMD_STATE_CONTROL, GENERAL_ACT_REQ | WIN_A_ACT_REQ}
};